With a 6 ft/1.83 m drum and a hopper that holds 6 cubic yards/4.6 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 4 Final is a powerful workhorse. Impressive 72.5 ft/22.1 m conveyor features self-cleaning tail pulley and return idlers.
| Manufacturer | Vermeer |
| Model | TR626 Trommel Screen |
| Category | Landscape, Recycling |
| Price | Request a Quote |
| Year | 2024 |
| Conveyor Belt Width | 36in (91.4cm) |
| Tail Pulley Takeup | 12in (30.5cm) |
| Conveyor Motor Displacement | 38.4cu-in (629.3cu-cm) |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers |
| Fines Conveyor Length | 72.5ft (22.1m) |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 16.6' (5.1 m) with drum at 4 degrees |
| Fines Conveyor Frame | 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing |
| Rubber Flashing | Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Fines Belt Speed | 405ft/min (123.4m/min) |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Self-Cleaning Return Idlers | 11, each 4" (10.2 cm) diameter |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Brush Diameter | 14in (35.6cm) |
| Maximum Variable Overs Belt Speed | 290ft/min (88.4m/min) |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Overs Conveyor Length | 19ft (5.8m) |
| Overs Conveyor Frame | 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Size | 48" (121.9 cm) wide with raised crescent |
| Solid Return Idler Size | 4" x 8" diameter |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft |
| Conveyor Belt Stacking Height | 3' (.9 m) x 10' (3.1 m) |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Tail Pulley Takeup | 12in (30.5cm) |
| Capacity | 22500lbs (10205.8kg) |
| Axle/Suspension | Leaf spring |
| Tires - Option One | 235-75R 17.5H qty. 4 |
| Frame Description | 4 independent hydraulic jacklegs |
| Weight | 65000lbs (29483.5kg) |
| Transport Height | 13.5ft (4.1m) |
| Operation Width | 113in (287cm) |
| Transport Width | 113in (287cm) |
| Operation Height | 15.9ft (4.8m) |
| Hitch Weight | 30000lbs (13607.8kg) |
| Transport Length | 54.5ft (16.6m) |
| Operation Length | 84.4ft (25.7m) |
| Capacity | Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40% |
| Tank capacity | 200gal (757.1L) |
| Operation | 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) |
| Drum Operation | 0-42.6 gpm (161.3 L/min) |
| Thrust Bearing Face | 2.9in (7.4cm) |
| Drum Speed | 0-24 rpm |
| Maximum Screen Panels | 8 |
| Thrust Bearing Diameter | 5in (12.7cm) |
| Drum Diameter | 6ft (1.8m) |
| Drum Motor | 48.8 cu in (800 cu cm) displacement |
| Drum Angle Adjustability | 0-7 degrees |
| Drum Drive Chain | 140 WT |
| Drum Support Description | Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width |
| Drum Length | 26ft (7.9m) |
| Hopper Height | 9.5' (2.9 m) from ground level at operating incline |
| Apron Opening Height | 34in (86.4cm) |
| Apron Conveyor Belt Width | 48in (121.9cm) |
| Apron Opening Width | 43in (109.2cm) |
| Hopper Opening | 13.2' x 5.3' (4 m x 1.6 m) |
| Apron Conveyor Rollers | 4" (10.2 cm) diameter qty. 14 |
| Hopper Bottom Width | 48in (121.9cm) |
| Apron Conveyor Length | 16ft (4.9m) |
| Hopper Capacity | 6cu yd (4.6cu m) |
| Apron Conveyor Speed | 0-35 fpm (0-10.7 m/min) |
| Conveyor Motor Displacement | 38.4cu-in (629.3cu-cm) |
| Fines Belt Speed | 405ft/min (123.4m/min) |
| Conveyor Belt Width | 36in (91.4cm) |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Head/Tail Pulley Type | Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) |
| Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers |
| Tail Pulley Takeup | 12in (30.5cm) |
| Self-Cleaning Return Idlers | 6, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | Part of trailer frame |
| Make and Model | John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F |
| Number of Cylinders | 4 |
| Engine Rating | 134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm |
| Fuel Tank Capacity | 73gal (276.3L) |
| Fuel Consumption | 3.5 gph (13.3 L/hr) under most operating conditions |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30deg |
| Battery | 950 cold cranking amps |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15/40 |
| Oil Volume with Filter | 15.5qt (14.7L) |
| System Voltage | 12 V, 120 amp alternator |
| Air Cleaner | Dual element oversized |
| Radiator Fan | Suction-type |
| Make and Model | John Deere 4045H Tier 3 |
| Number of Cylinders | 4 |
| Engine Rating | 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm |
| Fuel Tank Capacity | 100gal (378.5L) |
| Fuel Consumption | 3.5 gph (13.3 L/hr) under most operating conditions |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30deg |
| Battery | 950 cold cranking amps |
| Oil Filter | Spin-on |
| Oil Volume with Filter | 15.5qt (14.7L) |
| System Voltage | 12 V, 120 amp alternator |
| Air Cleaner | Dual element oversized |
| Radiator Fan | Pusher type |
| Conveyor Motor Displacement | 21.4cu-in (350.7cu-cm) |
| Fines Conveyor Length | 30.5ft (9.3m) |
| Fines Belt Speed | 705ft/min (214.9m/min) |
| Conveyor Belt Type | 150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm), vulcanized |
| Head/Tail Pulley Type | Rubber lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Idler Type | 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers |
| Self-Cleaning Return Idlers | 4, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | 2" x 8" (5.1 cm x 20.3 cm) structural steel building |
