| Manufacturer | Vermeer |
| Model | D24 HDD |
| Category | Renewable Energy, Utility Installation |
| Price | Request a Quote |
| Year | 2024 |
| Thrust/Pullback Pump Relief Pressure | 5000psi (344.7bar) |
| Thrust/Pullback Pump Flow at Max Engine RPM | 27gpm (102.2L/min) |
| Rotation Pump Relief Pressure | 5000psi (344.7bar) |
| Rotation Pump Flow at Maximum Engine RPM | 27gpm (102.2L/min) |
| Auxiliary Pump Relief Pressure | 2750psi (189.6bar) |
| Auxiliary Pump Flow at Maximum Engine RPM | 8gpm |
| Hydraulic Supply Filter Rating | B1000 = 6 micron |
| Hydraulic Return Filter Rating | B1000 = 11 micron |
| Minimum Bore Diameter | 4in (10.2cm) |
| Maximum Spindle Speed at Max Engine RPM | 198rpm |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 1460ft-lb (1979.5Nm) |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 2270ft-lb (3077.7Nm) |
| Automated Rod Loader | Yes, now with Automated Rod Exchange |
| Maximum Ground Drive Speed at Maximum Engine RPM | 3.3mph (5.3km/h) |
| Maximum Carriage Speed at Maximum Engine RPM | 181ft/min (55.2m/min) |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 3080ft-lb (4175.9Nm) |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 90ft/min (27.4m/min) |
| Noise Level at Operator's Ear | 88 dB(A) |
| Guaranteed sound power (CE-rating) | 100 dB(A) |
| Thrust | 24700lbs (109.9kN) |
| Pullback | 24700lbs (109.9kN) |
| Maximum Spindle Speed (Low at Maximum Engine RPM) | 99rpm |
| Maximum Spindle Speed (Medium at Maximum Engine RPM) | 132rpm |
| Max peak thrust | 24700lbs (109.9kN) |
| Continuous thrust | 22000lbs (97.9kN) |
| Max peak pullback | 24700lbs (109.9kN) |
| Continuous pullback | 22000lbs (97.9kN) |
| Max Fuel Consumption | 5gph (18.7lph) |
| Fuel Type | Ultra low sulfur diesel |
| Make and Model | CAT C3.6 |
| Aspiration | Turbo |
| Gross Horsepower | 100hp (74.6kw) |
| Maximum Engine RPM | 2000rpm |
| Maximum Operating Angle (Left/Right)* | 35 deg |
| Maximum Operating Angle (Fore/Aft)* | 35 deg |
| Emissions rating | T4F/SV |
| Displacement | 220cu-in (3.6L) |
| Cooling Method | Liquid |
| Idle Speed | 1000rpm |
| Maximum Pressure | 900psi (62.1bar) |
| Maximum Flow | 45gpm (170.3L/min) |
| On Board Tank Capacity | 5gal (18.9L) |
| Brand | FMC |
| Stakedown System | Standard |
| Breakout System | Sliding, open side |
| Flow Indicator | Standard |
| Drilling Lights | Standard |
| Strike Alert | Standard |
| Remote Lockout | Standard |
| Operator Presence | Standard |
| Fuel Tank | 35gal (132.5L) |
| Hydraulic Tank | 25gal (94.6L) |
| Weight | 16380lbs (7429.8kg) |
| Angle of Approach | 18deg |
| Length (Minimum Transport) | 224in (569cm) |
| Width (Minimum Transport) | 56in (142.2cm) |
| Height (Minimum Transport) | 89in (226.1cm) |
| Drill Rod Thread | #600 |
| Thread Type | Firestick |
| Length | 10ft (3m) |
| Rod Diameter | 2.375 in (6.03 cm) |
| Joint Inside Diameter | .9in (2.2cm) |
| Weight | 75lbs (34kg) |
| Minimum Bend Radius | 108ft (32.9m) |
| Joint Outside Diameter | 2.625 in (6.67 cm) |
| Rodbox capacity | 400ft (121.9m) |
| Drill Rod Thread | #600 |
| Thread Type | Firestick |
| Length | 10ft (3m) |
| Rod Diameter | 2.375 in (6.03 cm) |
| Joint Inside Diameter | .9in (2.2cm) |
| Joint Outside Diameter | 2.625 in (6.67 cm) |
| Weight | 75lbs (34kg) |
| Bend Radius | 108 ft (33 m) |
| Rodbox capacity | 480ft (146.3m) |
