Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, expect smooth towing thanks to the rubber-torsion suspension.
| Manufacturer | Vermeer |
| Model | BC1000XL Tier 4 Final Brush Chipper |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
| Oil Filter | Spin-on |
| Make and Model | Deutz D2.9L Tier 4 Final |
| Clutch Drive Engagement | Belt tensioner |
| Maximum Angle of Continuous Operation | 30deg |
| Fan | 18.625" (47.3 cm) suction |
| Coolant Capacity (Engine and Radiator) | 13.3gal (50.3L) |
| Clutch Type | Clutchless PTO |
| Gross Horsepower (Maximum) | 74hp (55.2kw) |
| Cooling Medium | Liquid |
| Max Fuel Consumption | 4.6gph (17.4lph) |
| Fuel Tank Capacity | 25gal (94.6L) |
| Torque (Max) | 181ft-lb (245.4Nm) |
| Alternator | 95 Amp |
| Recommended Oil | 10W30 |
| Air Cleaner | 2-stage dry with safety element |
| Number of Cylinders | 4 |
| Oil Volume with Filter | 8.4qt (7.9L) |
| Fuel Type | Diesel |
| Number of Knives | 2 |
| Feed Roller Dimension | 20" x 17" (50.8 cm x 43.2 cm) |
| Motor Manufacturer | White |
| Number of Feed Roller Motors | 1 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 1 |
| Pinch Point - Distance to End of Feed Table | 66.5in (168.9cm) |
| Motor Displacement | 28.3 |
| Infeed Hopper Height | 12in (30.5cm) |
| Feed Roller Minimum Distance to Drum | 1in (2.5cm) |
| Weight of Feed Roller | 400lbs (181.4kg) |
| Infeed Table Length | 32in (81.3cm) |
| Infeed Throat Capacity | 12" H x17" W (30.5 cm H x 43.2 cm W) |
| Feed Speed | 105ft/min |
| Infeed Table Width | 52in (132.1cm) |
| Infeed Table Material Thickness | .2in (.5cm) |
| Distance from Feed Table to Ground | 26in (66cm) |
| Feed Roller Clamp Load | 350lbs (158.8kg) |
| Tongue Weight - Engine Option One | 600lbs (272.2kg) |
| Length - Table Down, Tongue Extended | 208in (528.3cm) |
| Weight - Engine Option One | 4995lbs (2265.7kg) |
| Height | 101in (256.5cm) |
| Width | 66.5in (168.9cm) |
| Tongue Weight - Engine Option Two | 600lbs (272.2kg) |
| Length - Feed Table Up, Tongue In | 160in (406.4cm) |
| Weight - Engine Option Two | 4995lbs (2265.7kg) |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3.5" x 17.3" (8.9 cm x 43.8 cm) |
| Weight With Shaft | 460lbs (208.7kg) |
| Thickness | .4in (1cm) |
| Diameter | 20in (50.8cm) |
| Fixture Method | Weld-on |
| Number of Paddles | 5 |
| Number of Knives | 2 |
| Knife Size | 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) |
| Safety Lock - Number of Positions | 2 |
| Speed | 2050 rpm |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Useable Edges | 2 |
| Width | 20in (50.8cm) |
| Bedknife Thickness | 1in (2.5cm) |
| Bedknife Material | 1018 |
| Material Capacity | 12in (30.5cm) |
| Knife Thickness | .6in (1.6cm) |
| Material | A8 chipper steel |
| Number of Cylinders | 4 |
| Maximum Angle of Continuous Operation | 30deg |
| Fuel Tank Capacity | 25gal (94.6L) |
| Make and Model | Deutz TD2.9L Tier 4 Final |
| Clutch Drive Engagement | Belt tensioner |
| Coolant Capacity (Engine and Radiator) | 2.9gal (11L) |
| Cooling Medium | Liquid |
| Clutch Type | Clutchless PTO |
| Oil Filter | Spin-on |
| Gross Horsepower (Maximum) | 49hp (36.5kw) |
| Air Cleaner | 2-stage dry with safety element |
| Recommended Oil | 10W30 |
| Fan | 15" (38.1 cm) suction |
| Max Fuel Consumption | 3gph (11.4lph) |
| Torque (Max) | 108ft-lb (146.4Nm) |
| Alternator | 95 Amp |
| Oil Volume with Filter | 8.4qt (7.9L) |
| Fuel Type | Diesel |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Green hold-to-run button |
| Reduced Sensitivity | 12deg |
| Normal Sensitivity | 22deg |
| Actuation Force (BFSB) | 34lbs (15.4kg) |
| Actuation Force | 34lbs (15.4kg) |
| Bottom Feed Stop Bar Diameter | 2in (5.1cm) |
| Positions | 4: E-stop, forward, neutral and reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400lbs (14242.8kg) |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5V |
| Bore | 2.4in (6.1cm) |
| Type | Spherical rollers |
| Number of Bearings | 2 |
| Static Capacity | 53500lbs (24267.2kg) |
| Filtration Method | 10 micron return; 100 micron suction |
| Oil Cooler | No |
| Directional Control | Yes |
| Flow Control | No |
| System relief pressure | 2500psi (172.4bar) |
| Tank capacity | 7gal (26.5L) |
| Recommended Oil Type | Vermeer VMF |
| System Type | Tandem center |
| Pump Flow at Maximum RPM | 2.7gpm (10.2L/min) |
| Radio Remote Control | No |
| Switches | Feed Stop Bar Sensitivity, Droop, Ecoldle |
| Battery | Group 31; 950 CCA |
| Standard Gauges | MFD, hour |
| System Voltage | 12 Volt |
| Display | Multifunctional display (MFD) |
| Controller | Vermeer ACS |
| Shutdown System | Yes |
| Fender Description | Bolt-on-steel |
| Hitch Type | Pintle |
| Frame Description | 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness |
| Tongue Extension | Extendable 24" (61 cm) @ 12" (30.5 cm) increments |
| Tongue Description | 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) |
| Manufacturer - Option Two | Dexter |
| Capacity - Option Two | 7000 lb (3175.2 kg) |
| Axle/Suspension - Option Two | Torsion |
| Tires - Option One | ST235/80/R16 Load Range E |
| Axle/Suspension | Torsion |
| Wheels - Option Two | 16" x 6" (40.6 cm x 15.2 cm) |
| Tires - Option Two | ST235/80R16 Load Range E |
| Capacity - Option One | 5200 lb (2358.7 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber torsional |
| Wheels - Option One | 16" (40.6 cm) |
| Type - Option Two | Rubber torsional |
| Trailer Light Type | LED |
| Brake Type | Standard electric or optional hydraulic |
| Rotation Type | Rotation handle with pin lock |
| Rotational Lock | Yes |
| Chute Rotation Angle | 270deg |
| Chute Height | 101in (256.5cm) |
